Specifying Smart Glass Technologies: A Guide for Architects and Designers

Recent Posts

We provide nationwide smart glass and PDLC smart film installation for commercial and residential projects, with dedicated service pages for the states listed below.

Arizona | California | Colorado | DC | Florida | Georgia | Illinois | Maryland | Massachusetts | New Jersey | New York | North Carolina | Pennsylvania | Texas | Virginia | Utah

Smart glass has become an increasingly valuable architectural material, allowing designers to incorporate dynamic glazing into commercial, residential, healthcare, and hospitality environments. However, not all smart glass technologies function the same way, and selecting the right system requires more than choosing between transparent and opaque glass.

Some technologies are designed primarily for on-demand visual privacy, while others focus on solar heat gain, glare reduction, and daylight control. Understanding these differences is essential when specifying smart glass for a new construction or renovation project.

This guide examines the major smart glass technologies, their architectural applications, and the practical considerations that should influence product selection.

Understanding the Different Smart Glass Technologies

The three principal electrically controlled smart glass technologies are Polymer Dispersed Liquid Crystal (PDLC), electrochromic glass, and Suspended Particle Device (SPD) glazing.

Although all three change the optical properties of glass, they achieve different results.

PDLC Smart Glass: On-Demand Privacy

PDLC (Polymer Dispersed Liquid Crystal) technology uses liquid crystals suspended within a polymer layer to change glass from transparent to translucent.

When electricity is applied, the liquid crystals align, allowing light to pass through with relatively little scattering. When the power is removed, the crystals become randomly oriented, scattering light and producing a frosted appearance.

Primary advantages:

  • Near-instant switching between clear and frosted states
  • On-demand visual privacy without conventional blinds or curtains
  • Continued transmission of diffused daylight in the opaque state
  • Integration into interior glass partitions, doors, and windows
  • Availability as laminated smart glass or retrofit smart film

PDLC is particularly well suited for conference rooms, private offices, healthcare facilities, and other environments where visual privacy is the primary design requirement.

However, PDLC should not automatically be treated as a substitute for solar-control glazing. Its ability to scatter visible light does not necessarily translate into substantial reductions in solar heat gain.

PSCT Smart Glass: Reverse-Mode Liquid Crystal Technology

Polymer Stabilized Cholesteric Texture (PSCT) is another electrically controlled liquid-crystal technology used in switchable glazing. Although it shares some characteristics with PDLC, PSCT can operate differently depending on its formulation and design.

One of the most notable distinctions is the availability of reverse-mode PSCT, which can remain transparent without electrical power and become translucent when voltage is applied. This is the opposite of conventional PDLC smart glass, which typically requires electricity to maintain its transparent state.

PSCT technology can be useful for specialized architectural applications where the preferred default appearance is clear rather than frosted.

Primary advantages:

  • Reverse-mode configurations that remain clear without power
  • Electrically controlled transitions between transparent and translucent states
  • Potential suitability for applications requiring a clear default state
  • Specialized liquid-crystal formulations for architectural glazing
  • Alternative switching characteristics compared with conventional PDLC

However, PSCT products are less commonly specified than conventional PDLC systems, and availability, pricing, switching behavior, and installation requirements can vary significantly between manufacturers.

Specification considerations: Architects should verify whether a proposed PSCT product uses normal-mode or reverse-mode operation, its power requirements, optical performance, available glass configurations, and suitability for the intended environment.

PSCT should not automatically be considered interchangeable with PDLC. Both technologies can provide switchable light scattering, but their electrical behavior and available product configurations may differ.

Electrochromic Glass: Solar and Daylight Control

Electrochromic glass uses electrically activated coatings to change the tint of glazing. Rather than switching from clear to frosted, the glass transitions between lighter and darker states.

This technology is primarily designed to manage sunlight, glare, and solar heat gain while maintaining a degree of visibility through the glass.

Primary advantages:

  • Adjustable tint levels
  • Reduced glare and solar heat gain
  • Potential improvements in occupant comfort
  • Integration with automated building controls
  • Low power requirements for maintaining selected tint states in many systems

Electrochromic glass is commonly considered for exterior windows, curtain walls, and skylights.

One important specification consideration is switching speed. Depending on the product and glazing dimensions, a complete tint transition may take several minutes.

Electrochromic glass also does not typically provide the frosted visual privacy associated with PDLC technology.

SPD Smart Glass: Adjustable Light Transmission

Suspended Particle Device (SPD) technology uses microscopic particles suspended within a film to regulate transmitted light.

When electrical power is applied, the particles align and allow more light to pass through. When power is reduced or removed, the particles become less aligned, producing a darker appearance.

Primary advantages:

  • Rapid transitions between lighter and darker states
  • Adjustable light transmission
  • Glare reduction
  • Applications where maintaining outward visibility is desirable
  • Integration into specialized glazing systems

SPD technology is used in applications such as skylights, automotive glazing, and specialized architectural installations.

Although SPD can significantly darken glass, it is not generally equivalent to the frosted privacy provided by PDLC.

Comparing Smart Glass Technologies

Feature PDLC Smart Glass PSCT Smart Glass Electrochromic Glass SPD Smart Glass
Technology Polymer Dispersed Liquid Crystal Polymer Stabilized Cholesteric Texture (reverse-mode) Electrochromic technology Suspended Particle Device
Primary Purpose On-demand visual privacy Switchable privacy with a clear default state Solar heat and glare control Adjustable light transmission and glare control
Switched Appearance Transparent to frosted Transparent to translucent or frosted Clear to tinted Lighter to darker tint
How It Works Liquid crystals align when powered, reducing light scattering Electrically changes the optical behavior of stabilized liquid crystals Electrochemical reactions change the tint of specialized coatings Electrically aligns suspended particles to regulate light transmission
Power OFF State Frosted Clear in reverse-mode configurations Product-dependent; may retain its last tint Dark
Privacy Capability Strong visual obscuration in the frosted state Visual obscuration when activated; varies by product Limited; tinted glass may remain see-through Limited; depends on tint level and lighting
Light Transmission Allows substantial diffused daylight when frosted Varies by formulation and switching state Adjustable through multiple tint levels Adjustable from lighter to very dark
Switching Speed Typically under one second Product-dependent; often rapid Often several minutes for full transitions Typically seconds
Solar Control Not the primary function; performance depends on glazing assembly Not the primary function Designed to manage solar heat gain and glare Designed to regulate transmitted sunlight and glare
Retrofit Installation Available as adhesive smart film for suitable existing glass Specialized products; availability varies Typically integrated into new glazing systems Specialized glazing products; retrofit options vary
Best Applications Conference rooms, offices, healthcare, hospitality, and residential spaces Specialized glazing requiring a clear unpowered state Exterior windows, curtain walls, and skylights Skylights, specialty glazing, and glare-control applications
Market Availability Widely available as laminated smart glass and retrofit smart film Specialized technology with more limited availability Established architectural solar-control technology Specialized architectural and automotive applications

Note: PSCT characteristics shown refer to reverse-mode configurations. Actual performance, switching speed, optical properties, and installation requirements vary by manufacturer and glazing assembly.

Key Considerations When Specifying Smart Glass

1. Define the Primary Performance Requirement

The first question should be whether the project requires visual privacy, solar control, glare reduction, or a combination of these functions.

For example, a conference room that requires immediate visual separation may benefit from PDLC smart glass. A building facade designed to reduce afternoon solar heat gain may be better suited to electrochromic glazing.

Defining the primary objective early helps prevent the selection of a technology that cannot deliver the intended result.

2. Determine Whether New Glass or Retrofit Film Is Appropriate

For projects involving existing glass partitions, self-adhesive PDLC smart film may offer a practical alternative to replacing the entire glazing system.

For new construction, laminated smart glass allows the switchable layer to be integrated into the glass assembly during manufacturing.

The appropriate solution depends on existing glass conditions, project requirements, environmental exposure, and installation constraints.

3. Consider Moisture and Environmental Exposure

Environmental conditions can significantly influence product selection.

For bathrooms, shower enclosures, and other wet environments, laminated smart glass is generally preferable to surface-applied smart film because the switchable layer is protected within the glass assembly.

The complete installation must still address edge sealing, electrical connections, and applicable safety-glazing requirements.

4. Plan Electrical and Control Integration Early

Electrically controlled smart glass requires coordination between the glazing contractor, electrical contractor, and design team.

Important considerations include:

  • Transformer and power supply locations
  • Wiring routes and concealed connections
  • Wall switches, remote controls, and automation
  • Integration with building management systems
  • Access for maintenance and future servicing

Addressing these requirements during the design phase can reduce installation complications and unnecessary modifications.

5. Review Optical and Safety Performance

Architects should request technical documentation appropriate to the intended application.

Relevant specifications may include visible light transmission, haze, solar heat gain coefficient, electrical requirements, switching performance, glass thickness, and applicable safety-glazing certifications.

For exterior glazing, the performance of the complete insulated glass assembly is especially important.

Common Smart Glass Specification Mistakes

Assuming all smart glass provides privacy: Tinting technologies may reduce visibility without fully obscuring people or objects behind the glass.

Confusing privacy with solar control: Frosted PDLC glass diffuses light but should not be assumed to provide the same thermal performance as specialized solar-control glazing.

Overlooking installation conditions: Moisture, temperature, glass construction, and electrical access can affect which products are suitable.

Waiting too long to coordinate electrical requirements: Smart glass is both an architectural glazing product and an electrically operated system.

Specifying without reviewing samples: Clear-state haze, opaque-state appearance, color, and optical performance can differ between manufacturers.

Choosing the Right Smart Glass for Your Project

Selecting smart glass should begin with the intended architectural function rather than the technology name.

For projects requiring immediate visual privacy, PDLC smart glass and smart film offer a versatile solution. For projects focused primarily on controlling solar heat gain and glare, electrochromic or SPD glazing may be more appropriate.

In some projects, multiple glazing technologies may be used in different areas of the same building to address distinct performance requirements.

Work With an Experienced Smart Glass Specialist

With more than 10 years of experience, Opaque Smart Glass helps architects, designers, and contractors incorporate PDLC smart glass and smart film into commercial, residential, healthcare, and hospitality projects.

Our in-house installation team works with project stakeholders to address product selection, installation requirements, and electrical coordination.

Whether you’re specifying laminated smart glass for a new conference room or considering smart film for existing glass partitions, early collaboration can help ensure the selected solution meets your project’s functional and aesthetic goals.

Explore our Smart Glass and Smart Film solutions, or view completed projects to see how switchable glass is being incorporated into real architectural environments.

Frequently asked questions

What are the main types of smart glass technology?

The main electrically controlled smart glass technologies include PDLC (Polymer Dispersed Liquid Crystal), PSCT (Polymer Stabilized Cholesteric Texture), electrochromic glass, and SPD (Suspended Particle Device) glazing. PDLC and certain PSCT systems are primarily used for switchable visual privacy, while electrochromic and SPD technologies are generally designed to control light transmission and glare.

Conventional PDLC smart glass typically becomes transparent when electricity is applied and frosted when power is removed. Reverse-mode PSCT can operate in the opposite way, remaining transparent without power and becoming translucent when energized. The appropriate choice depends on the desired default state, optical requirements, product availability, and project specifications.

PDLC smart glass is often an excellent choice for conference rooms because it provides rapid switching between transparent and frosted states. It allows offices to create visual privacy for meetings while maintaining an open architectural appearance when privacy is not needed. Other technologies may be appropriate when solar control is the primary objective.

Yes. Self-adhesive PDLC smart film can be applied to many existing glass partitions without replacing the glass. This makes it a practical option for office renovations, conference rooms, and other retrofit projects. The existing glass condition, dimensions, accessibility, and environmental exposure should be evaluated before installation.

Some smart glass technologies are specifically designed for solar control. Electrochromic and SPD glazing can reduce transmitted sunlight and glare, while certain configurations can help manage solar heat gain. PDLC smart glass primarily provides visual privacy by scattering light and should not automatically be considered equivalent to dedicated solar-control glazing.

Architects should evaluate the intended function, visual privacy requirements, optical performance, glazing configuration, safety standards, environmental conditions, electrical integration, and installation requirements. Reviewing manufacturer specifications and coordinating with an experienced smart glass installer early in the design process can help avoid compatibility and performance issues.

Posted on Google Google
Alberto Bordonaba profile picture
Alberto Bordonaba
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
The craftsmanship, professionalism, communication and final result have been excellent. Very happy with our new smart glass at our Orthodontic practice. Thank you.
Posted on Google Google
Owen Kiniery profile picture
Owen Kiniery
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Opaque did conference rooms in my buildings. Great work and highly trained individuals handled the projects from start to finish
Posted on Google Google
Victor Saadeh profile picture
Victor Saadeh
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
You guys were great. High quality materials, great clean service!
Posted on Google Google
Dmitriy Gershik profile picture
Dmitriy Gershik
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
I hired roman to do smart glass on my balcony doors. They did a beautiful and efficient job. I am very happy with their work. I will be using them for my parents house
Posted on Google Google
Carmelo D'Onofrio profile picture
Carmelo D'Onofrio
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Every time we use Opaque Smart Glass, we are extremely satisfied and happy with the results of their work. Roman is there and on top of everything to make sure the job runs smooth all the way to finish. This is the perfect touch to add some class to your home.
Posted on Google Google
John Fazio profile picture
John Fazio
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Used them in my conference room. Excellent work! 10/10 would definitely recommend.
Posted on Google Google
James Mannix profile picture
James Mannix
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great company. Great job. Will highly recommend in the future
Posted on Google Google
June Alberghina profile picture
June Alberghina
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great Service
Posted on Google Google
Consuelo Macri profile picture
Consuelo Macri
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Just had the smart film installed at my tattoo parlor. Came out amazing. Highly recommend.